left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


FBT

MODUS 4820 LA

Šifra Proizvoda: 65974

Napiši prvi komentar za ovaj proizvod





3998 €
2899 €

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Kratak opis

MODUS is not just another line array in the market. It's the essence of ideas and use of technologies condensed into one focus: the invention of the most flexible sound reinforcement system able to satisfy the broadest applications, from live touring to permanent installation, without compromising quality and expectations.

2899 €

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

  • 20° vertical dispersion
  • 2 way powered bi-amped true line array, bass reflex design
  • 4x200 mm (8") custom neodymium woofers with 50mm voice coil (2")
  • 4x25 mm (1") neodymium compression drivers and 44mm voice coil (1.7")
  • 58Hz – 20Khz frequency response
  • class D 600 Wrms amplifier for LF
  • class D 300 Wrms amplifier for HF
  • High efficiency switching power supply
  • DSP on board with 8 EQ presets, +/- 5db HF level  control for accurate amplitude shading
  • control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
  • 90° horizontal waveguide with near flat wavefront up to 18Khz
  • 18 mm (3/4") birch plywood enclosure, with handles and mechanical hardware for suspension
  • Mechanical hardware for suspension with 10:1 safety factor
  • different configurations allowed by a complete range of optional accessories
  • Performance comparable to high-end touring line arrays at an extremely competitive cost
  • the extended frequency response at 58Hz allows the use in medium SPL applications without additional subwoofers.

MODUS is a constant curvature line array system comprising two modules, the MODUS  4805LA (5°V) and the MODUS 4820LA (20°V) each one equipped with 4 x 8" neodymium magnet woofers and 4 x 1" (1.7"VC) neodymium magnet HF compression drivers. The system is designed to achieve a very uniform distribution of SPL in the listening area in both large and small venues thanks to its total modularity. The constant curvature overcomes the limitations of line arrays with variable angles which inevitably create unmatched SPL between neighbouring enclosures at high frequencies.

The grouping of two ‘classic' array modules in one gives an amazing economic advantage and simplifies the setup of the system.

Two subwoofers are available for low frequency extension, both with mechanical suspension hardware to deliver seamless integration.

The MODUS 215FSA is a dual 15'' subwoofer with a band-pass design and push-pull configuration, delivering significantly extended low frequency response despite its compact size. It is acoustically designed to support two or three MODUS 4805 or 4820 modules.

The MODUS 118FSA is a single 18'' subwoofer with a bass-reflex design and compact dimensions that make it ideal for suspension. Designed to support one or two MODUS 4805LA or 4820LA modules and aesthetically similar to a 4805 module, the sub is capable of very high SPL in relation to its size. It can either be suspended above the line array modules or ground stacked. Additionally, the 118FSA can be used in conjunction with the 215FSA to further extend and reinforce low end performance

Built-in amplifier LF/HF: 600/300 W RMS
Built-in amplifier peak LF/HF: 1200/600 W
Frequency response: 58Hz - 20kHz -6dB
Low frequency woofer: 4x8 - 2 coil-neodymium inch
High frequency driver: 4 x 1 - 1.7 coil neodymium inch
Maximum SPL cont/peak: 130/137 dB
Dispersion: 90° x 20° H x V
Input impedance: 22 Kohm
Ac power requirements: 640 VA
Input connector: XLR with loop
Power cord: 5 / 16.4 mm/inch
Net Dimension (WxHxD): 727x510x405 - 28.62x20.39x16.37 mm/inch
Net weight: 45.5/100.31 kg/lb
Transport Dimension (WxHxD): 830x620x520 - 31.49x24.40x20.47 mm/inch
Transport weight: 55.5/122.35 kg/lb

 Scroll To Top