left right

Dobrodošli na Player e-shop!

Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!



Šifra Proizvoda: 80238

Napiši prvi komentar za ovaj proizvod



Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:

ili emailom:

Prikazana cena je za komad.

Kratak opis

ES1.0 - The Core of Your ES System / The ES1.0 is a compact, small footprint

Pogledaj proizvod iz više uglova:

*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

ES1.0 - The Core of Your ES System

ES1.0 - The Core of Your ES System
  • The ES1.0 is a compact, small footprint
  • 3-way, very high output, active-driven, mid/high/mid-bass module designed as part of a complete ES system
  • Driven by the EPAK2500/R control and amplification unit
  • Can be combined with a variety of ES series subwoofers
  • For applications of up to 3000 people




  • Professional Baltic birch construction with wear resistant polymer coating.
  • 131dB sustained output, 134dB peak.
  • Controlled wide dispersion 90° x 40°, rotatable Mid /High horn for mounting in vertical or horizontal orientation.
  • New patent pending 1.75” (44mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, incredibly low distortion and extended frequency response.
  • 6” midrange driver, with a 1.75” (44mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight.
  • Horn loaded, 12” mid-bass driver with a 3” (76mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure.
  • Three way active requirement - 900W from the EPAK 2500/R providing 600W for the 12” low mid, 200W for the 6” midrange and 100W for the high frequency driver.
  • Proprietary side handle design for simplified handling and carrying.
  • High impact low friction feet, asymmetrically located on three sides allowing vertical or horizontal system set up, lock- in and easy cabinet movement.
  • Four internal corner braces tied to eight M10 suspension points. A total of 24 suspension points are available for custom installation applications.
  • Top hat for pole mounting applications.
  • Weather proofing option and special paint finishes available on request.


System Acoustic Perfomance


Max SPL Long-term 131dB
Max SPL Peak 134dB
-3dB Response 130Hz ÷ 20kHz
-10dB Response 85Hz ÷ 28kHz
Impedance Low 16Ω Mid 8Ω High 8Ω
Crossover Point 130Hz, 500Hz, 2.5kHz


High Frequency Section


High Horn Coverage Horizontal / Vertical 90° x 40° rotatable
High Frequency Amplifier Requirement 100W from EPAK 2500/R
Throat Exit Diameter / Diaphragm Size 1" / 1.75"
Diaphragm Material Nitride Titanium
Magnet Type Neodymium


Mid Range Section


Acoustic Design Horn Loaded
Mid Horn Coverage Horizontal / Vertical 90° x 40° rotatable
Midrange Amplifier Requirement 200W from EPAK 2500/R
Woofer Size / Voice Coil Diameter / Design 6" / 1.75"
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium


Mid-Bass Section


Acoustic Design Horn Loaded
Mid-bass Amplifier Requirement 600W from EPAK 2500/R
Woofer Size / Voice Coil Diameter / Design 12" / 3" / Inside Outside
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium


Speaker Input


Speaker Input EP6




Cabinet Material Baltic birch
Handles 2
Pole Mount 35mm
Color "Orange peeled" Matt Black or any RAL



Physical Dimensions


Height 700mm (27.55")
Width 450mm (17.71")
Depth 450mm (17.71")
Weight 34kg (74.8lbs)

 Scroll To Top